With Easter right around the corner (well, for most of you!) I thought I would share this fun tutorial I created a few years back.
Here is what you’ll need:
1. Start by sealing the wooden eggs with an all-purpose sealer. This will ensure the paint goes on evenly. Let the eggs dry for a couple of minutes. Continue by tracing the silhouettes on the contact paper. Once you have all the silhouettes traced, start cutting their outlines with x-acto knife or scissors.
2. Next, start painting the eggs your favorite color (remember this first coat is the color your silhouettes will be – so if you want white silhouettes, your first coat should be white). Let the eggs dry.
3. Peel off the back and stick the silhouette on the egg. Burnish the outside edges with your thumb. This will keep the dye from penetrating – resulting in a sharp silhouette.
5. Apply a second color over the entire egg, covering the silhouettes. This second color could vary from egg to egg. Allow them to dry for about 2-5 minutes. Start to pill the sticker and violá! You just made silhouette Easter eggs!
Tip 1: with a fine tip brush touch up the silhouettes to ensure crisp edges.
Tip 2: you can reuse the cut out silhouettes more than once.